Uncategorized

2005 or newer version of Q64-91 (pg260D) but external bolts are at a different location. Nose cone has no support webs. Flat back. External bolts at 3 & 9 o’clock. Torx screws at 2 & 8 o’ clock. $89.00                    $50.00 core

PG 260D. 9 tooth bendix.                                                  Used on Silverado engines. External bolts.                                        

PG260D. 9 tooth bendix.   External bolts. Flat back. Most apps. 2001 or later. $89.00 Lifetime         $40.00 core

5MT. Same as unit Q63-39 but smaller battery post.       Most units marked “No thick shim needed” Solenoid copper battery post is M8 x 1.25 $48.00                                $40.00 core

5MT. Same as Q64-13 but smaller battery post. Interchanges as a unit, but some internal parts differ. M8 x 1.25 copper battery post $48.00                         $40.00 c0re

Basically the same starter as Q63-12. Solenoid has small Bat. post. 66-143. Most units have a “no thick shim” needed in the solenoid bell housing. $48.00                         $40.00 core

PG260M. ’95-’01 GM models 3.8L.  Short bolt on left, long bolt on right. Ignition wire on right. $79.00                         $45.00 core

PG 260M. Permanent magnet. Bendix opening on left for 8 cyl. GM. Solenoid held on with 3 torx bolts. Small post on right. $79.00                           $45.00 core

PG 260M Series. Solenoid bolts to starter with 3 torx bolts. Q64-84 will work in it’s place and vice-versa.   $79.00                       $45.00 core

SD 210 series. Fits many 4cyl GM.                                                    Many have casting mark on solenoid bell housing. ” Thick shim not req’d” for proper installation O shape clamp holds solenoid onto starter.